Care & MaintenanceCHROME
They strictly use commercial cleanser and polish according to the manufacturer's directions.
Under normal use, clean with soft cloth dampened with water. For spots and spills, they recommend professional cleaning. For COM, refer to the specific cleaning instructions recommended by the fabric supplier.
EMU OUTDOOR FABRIC
It removes loose dirt with soft bristle brush or hose down with cold water. After this clean it with mixture of water and mild soap. Rub in mixture with soft brush and allow to thoroughly soak into fabric. After which you can rinse thoroughly with cold water and dry air.
3D KNIT MESH (SW_1) SEATING
You can clean with warm water and soap or wet sponge and wipe fabric. Household cleaners such as Windex may be used. Do not use cleaners containing bleach.
LAMINATE AND SOLID PHENOLIC
You can clean with soap and water. But for stubborn stains, use a non-abrasive household cleaner.
Under normal use, regular dusting and vacuum cleaning is necessary. For spots and spills, you can immediately wipe excess liquid. If necessary, use lukewarm water cleaning the entire area where spot occurred and air dry.
Under normal use, clean with soft cloth dampened with water. For spots and stains, use the recommended mixture of Woolite and water. Rinse with clean water and air dry.
Under normal use, you can clean it with Windex and soft cotton cloth.
POWDER COAT FINISHES
Chairs and table bases should be cleaned with a liquid detergent and water. Remove stubborn stains with liquid cleanser, such as Formula 409.
EMU OUTDOOR PAINT
Store in an enclosed and dry area during winter's to avoid condensation. Before winter and regularly every quarter, clean the metal surfaces with a cloth dipped in water or detergent and protect them with Vaseline oil polish.
It is always advised by manufacturer's direction that bases should be cleaned with a commercial powder, liquid, or paste metal cleaner and polish.
VENEERS AND PAINTED MDF
Clean regularly with mild soap and water and dry with a soft cloth. Never use ammonia-based cleaners or wax on wood surfaces.
CARL HANSEN WOOD FINISHES
Use Oil/White Pigmented Oil, Wipe it to clean with damp cloth. Wood should be treated twice per year on all surfaces.
Under normal use, clean with soft cloth dampened with mild soap solution. For stubborn stains and spills, a Sponge or soft brush may be used with mild non-abrasive cleaner.
Generate a habit to clean regularly with mild soap and water and dry it with a soft cloth.
Tables should be inspected and maintained regularly by tightening screws and bolts, inspecting casters and glides for damage, and inspecting all moving parts for damage and wear.